 |
|
Our Product Recommendations for Waste Incineration Plants
The table below shows an overview over measuring points in a waste incineration plant. The data is completed by the measuring tasks and the recommended analyzers of our delivery program. In practice, deviations from this example however can arise.
|
Recommended products |
|
Measuring point | Tasks | Suitable analyzers |
| |
|
Refuse pit
|
Prevention of explosion caused by fouling gases
|
 S700
|
| |
|
Behind firing chamber
|
Optimization of combustion, air ratio, gas volume flow
|
ZIRKOR302, S700, FLOWSIC100
|
| |
|
In front of dust filter
|
Dust load, protection against smouldering and explosion (electrostatic filter)
|
OMD41, FW56, S700
|
| |
|
Behind dust filter, in front of scrubber
|
Function check of dust filter, control of scrubber (input values)
|
RM230, RM210, FW100, MCS100E, GM31, GM35
|
| |
|
Behind scrubber, in front of denitrification
|
Function check of scrubber, control of denitrification (input value)
|
GM31, MCS100E, S700, OMD41, FW56
|
| |
|
Behind denitrification, in front of activated coke filter
|
Function check of denitrification, protection against smouldering, control of activated coke filter (input values)
|
GM31, MCS100E, S700
|
| |
|
Behind activated coke filter
|
Function check of the filter, protection against smouldering
|
S700, GM901
|
| |
|
Behind final purification
|
Function check of final purification, protection against smouldering
|
S700, GM901, MERCEM
|
| |
|
At the stack
|
Emission monitoring, data acquisition and evaluation
|
MCS100E, S700, EuroFID, GM31, GM35, ZIRKOR302, RM230, RM210, FW100, FLOWSIC100, MEAC2000
|
|
|
|
|
|
Company
Industries & Applications
Product Recommendations